F5-23XX can transmit 1 to 4 E1 channel over the IP networks. The device supports unframed E1 channel, and support all of the traditional E1 and IP services, such as voice, data, fax, signaling and the other all kinds of communication service. F5-23xX is widely used with WLAN to transmit E1 signals.

Features

• Transmitting unframed E1 signal through IP network
• E1 Number: 1 to 4 channels optional
• Ethernet port: 2 numbers, one for downlink, the other for uplink
• High transmitting speed, low transmitting delay time
• Clock Selectable: internal clock, external clock, network adaptable clock or recovered from E1 line
• Network adaptable clock is stable, little jitter and float
• Can be configured into N X 64K, or can be adaptable to network wide band N X 64K
• E1 information transmitted on the IP network has QOS guarantee
• Convenient to use, no complicated configuration
• Transmitted package based on the IP address, through switches, routers network equipment etc
• General UTP Ethernet interface, 10M/100M auto-negotiation

Specification

• Power
  Power consumption: < =4W
  AC power: 160-240v
  DC power: -48V
• Ethernet
  Physical port: RJ-45
  Port rate: 10/100Mbps
  Full/half duplex
  Compatible with IEEE802.3
• E1
  Physical port: BNC coaxial jack
  Input rate range: 2.048Mbps+-50ppm
  Port code: HDB3
  Impedance: 75ohm unbalanced
  Compatible with: G.703
• Environment
  Operating Temperature: 0~50oC
  Operating Relative Humidity: 20~90%
  Store Temperature: -20~65oC
  Store Relative Humidity: 10~95%
• Size
  270mm(W)*40mm(H)*105mm(D)
• LED
  UPLINK, DLINK, RUN1, RUN2, LOS1, LOS2, 10/100M, FDX, SYS, PWR
  

Application

Order Information
F5-2315A 1E1 over 1 Ethernet pot, Standalone, AC220V power supply
F5-2315D 1E1 over 1 Ethernet pot, Standalone, DC-48V power supply
F5-2325A 2E1 over 1 Ethernet pot, Standalone, AC220V power supply
F5-2325D 2E1 over 1 Ethernet pot, Standalone, DC-48V power supply                                                      F5-2345A 4E1 over 1 Ethernet pot, Standalone, AC220V power supply                                                     F5-2345D 4E1 over 1 Ethernet pot, Standalone, DC-48V power supply                                                      F5-1345   4E1, 1 Uplink Ethernet port, 220VAC and -48VDC 1+1 hot-redundant power supply