E1 to V.35 protocol converter can realize the bi-directional data transfer from E1 port to V.35. This equipment is widely used in communication network including WAN and LAN, realizing the transfer from E1 channel of SDH or PDH equipment to V.35 which maybe provided with router.

Feature

• E1 channel: both framed & unframed are OK, both 75 & 120ohm are OK
• Standard: G.703, line code: HDB3
• Alarm system for E1 loss
• Support local/remote loop test
• DB25 connector for V.35, in DCE mode
• Multiple clock selection: internal clock, V.35 line clock and E1 recovery clock
• Panel instruction for easy understanding of equipment working status
• Internal power supply, 220V AC and -48V DC optional
• Standalone and module at your selection

Specification

• E1 port
  Bit rate: 2.048Mbit/s+-50ppm
  Line code: HDB3
  Standard: Compatible with ITU-T G703
  Connector: BNC connector with line impedance 75ohm, RJ45 connector with line impedance 120ohm
  Jitter performance: in full compatible with G742 and G823
• V.35 port
  Line code: NRZ
  Bit rate: 2.048 Mbit/s+-50ppm
  Connector: DB25female, with DB25/M34 transfer line
  Way of Connection: DCE
  Clock: Line Clock, Local clock
• General
  Operating temperature: 0-50¡æ
  Power Supply: -48VDC or 220VAC+-20%
  Dimension: 170mm(W)*133mm(D)*40mm(H)

Application